Gold Member Since 2016
Audited Supplier
Binzhou Chengli Building Materials Co., Ltd.

Concrete Admixture, Polycarboxylate, Superplasticizer manufacturer / supplier in China, offering Flowable Grout Formulations Powder Superplasticizer, 50% 55% High Range Polycarboxylate Ether Superplasticizer for Concrete, Polycarboxylate Ether Polycarboxylic Admixture for Concrete (ASTM standard) and so on.

(/ )

Supplier Homepage Product PCE powder Water reducing type Flowable Grout Formulations Powder Superplasticizer

Flowable Grout Formulations Powder Superplasticizer

FOB Price: US $1,900-2,400 / Ton
Min. Order: 1 Ton
Min. Order FOB Price
1 Ton US $1,900-2,400/ Ton
Get Latest Price
Production Capacity: 3000mt/Month
Transport Package: IBC Tank or Flexi Tank
Payment Terms: L/C, T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: CL-WRP-98
  • Solid Content: 99% Powder
  • MOQ: 1mt
  • OEM&ODM: OEM&ODM
  • Alikali Content: 0.004
  • Appearance: Powder
  • Trademark: CL
  • Origin: China
  • Type: Polycarboxylate Superplasticizer
  • Dosage: 0.2%
  • Business Type: Factory
  • Technical Support: on Line & on Site
  • Pumping Time: 180min
  • Efficacy: Water Reducing Admixture
  • Specification: CL-WRP-99
  • HS Code: 38244010
Product Description

Product detail
Three types of powder polycarboxylate super plasticizer water reducing admixtures
 
1.CL-WRP-99 the powder type of  Polycarboxylate superplasticizer water reducing admixture  
2. CL-SRP-99 the powder type of Slow release polycarboxylate superplasticizer slump retention water reducing agent  
3.CL-98  dry mix mortar used integrated polycarboxylate superplasticizer water reducing admixture
 
 Advantages:
New formula,fully reaction, pure appearance
1. High water reduction
2. Low dosage, and so to save cost in comparison with other water reducers at equal performance
3. To maintain slump perfectly
4. To enable a much better flowability of the mixture
5. To improve the strength and durability of the concrete drastically
6. To save cement at equal strength and durability
7. Eco-friendly since no formaldehyde
 
Comparison data

(50% mother liquid) tested by Shanlv P.O.42.5 ordinary portland cement,with the dosage of 0.2% 
 CL-SRP-99:CL-WRP-99=4:6
87g water+0.60g CL-99+300g cement
Time       (min)slump variation retention      (mm)                               state
30min240mmmax
60min240mmmax
120min220mmlost
180min200mmlost

 
Introduction CL-WRP-99
CL-WRP-99 polycarboxylate superplasticizer powder water reducing  concrete admixture
Note:
           CL-WRP-99 must be dissolved into liquid about 20% solid content . 
           CL-WRP-99 can not been used as dry mix mortar additive. 
           CL-SRP-99 is slump retention admixture . it must used with CL-WRP-99
           Only CL-98 is a dry mix admixture to concrete.

 
 Specifications:
(1) polycarboxylate superplasticizer powder 99% ( please add water to a solid content of 20% before use ).
(2) With a high slump retention ability, without concrete segregation, with a much smaller slump loss than that of other superplasticizers.
(3) With a good dispersion, an excellent adaptability to different cements, and good water-reducing properties. A high water-reducing ratio up to 40% could be obtained when used in high strength grade concrete.(higher than C50). With a dosage of 0.2%,water reducing rate up to 32%.
(4) Cement paste fluidity ≥250mm (with a dosage of 0.2%).
Uses and Cautions:
(1) A recommended dosage is 0.16%-0.4%. Actual dosages should be determined by mixture design test according to concrete strength grade.
(2) 0ºC-40ºC the shelf life of liquid products is 12 months. 
(3) Concrete test must be carried out before utilization.
(4) This product is forbidden to be mixed with naphthalene superplasticizers.
(5) Experiment must be done when it is used together with other admixtures.
NO.Inspection ItemsUnitStandard ValueTest Results
1Appearance/white powderwhite powder
2Ph Value//8
3Solid Content%/99
4Alkali Content( Na2O+0.658K2O)%≤0.500.1
5 %≤0.2000.002
6Sodium Sulfate Content%≤0.500.25
71h After Fluidity of Cement Pastemm≥220240
8Water Reducing Rate%≥2532
9Atmospheric Pressure Bleeding Rate%≤6021
10The Difference Between the Setting TimeminInitial25
   Final 10
11Slump Variation Retention60min≥180240
  120min≥180220
  180min≥170200
12Ratio of Compressive Strengh3D≥170190
  7D≥150185
  28D≥135175
13Effect on Reinforcement Corrosion/No CorrodingNo Corroding
14Ratio of Shrinkage/≤110101
                                                                                    quick dissolve
 
Week of other agents
 
NameSpecification
 1.Big slump loss
2.Hard to avoid segregation when dosage is slightly higher
3.Certain pollution to the environment as formaldehyde 
Melamine water reducers1.Air entraining performance is bad
2.Use cost is comparatively high
3.No highlight in its features
Lignosulfonate water reducers1.Low water reduction
2.The performance is common
3.It's from 1930s, and is coming to be eliminated products. Still used today only for being eco-friendly and people's habit
4.Use cost is comparatively high

Product detail show

Why chose us

Price&supply ability
 
Price
1.The most competitive price in the world.
2.Finish the payment in global mode or use alibaba credit insurance service.
 
Supply ability
1.150 containers(1*20') per month.
2.A new order can be prepared and packaged in 2 days.

Package


Main products

1.polycarboxylate superplasticizer water reducing admixture 50%(high water reducing type)
2.slow release slump retention polycarboxylate superplasticizer water reducing admixture 50%(slump retention type)
3.polycarboxylate superplasticizer water reducing admixture powder 99%(high water reducing type)
4.slump retention polycarboxylate superplasticizer water reducing admixture powder 99%(slump retention type)
5.integrated polycarboxylate superplasticizer water reducing admixture powder 98%
6.aliphatic water reducing concrete admixture
7.SNF water reducing concrete admixture
8.sodium gluconate powder
9.TPEG HPEG
10.deformer

FAQ
1. Q: Are you a manufacturer or a trading company?
A: We are a manufacturer of PCE in China.

2. Q: Can you provide technical support?
A: Yes, we can provide on line technical assistance or on site technical assistance.

3. Q: How many is your production capacity?
A: We can produce final products 3000 Metric Tons per month.

4. Q: What's your MOQ?
A: 1 Metric Ton.

5. Q: Could you offer free sample?
A: Yes, we can provide sample free for your testing.

6. Q: What's your delivery time?
A: Within 7-12 days after receiving deposit.

7. Q: Could you do OEM or ODM?
A: Yes, we can. We can do solid content 50% or 60%.

8. Q: What's your export port?
A: Qingdao port or you requested.



 
Send your message to this supplier
Avatar
Ms. cristina
*From:
To: Ms. cristina
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now