Basic Info.
Application
Concrete Admixture
Type
Polycarboxylate Superplasticizer
Technical Support
on Line & on Site
Usage
Water Reducing Type
Classification
Chemical Additives
Efficacy
Water Reducing Admixture
Transport Package
IBC Tank or Flexi Tank
Product Description
Product detail
Two types of liquid polycarboxylate super plasticizer water reducing admixtures1. Polycarboxylate superplasticizer water reducing admixture (CL-WR)
2. Slow release polycarboxylate superplasticizer slump retention water reducing agent (CL-SR)
Advantages:
New formula,fully reaction, pure appearance
1. High water reduction
2. Low dosage, and so to save cost in comparison with other water reducers at equal performance
3. To maintain slump perfectly
4. To enable a much better flowability of the mixture
5. To improve the strength and durability of the concrete drastically
6. To save cement at equal strength and durability
7. Eco-friendly since no formaldehyde
Comparison data
(50% mother liquid) tested by Shanlv P.O.42.5 ordinary portland cement,with the dosage of 0.32%
CL-SR-50:CL-WR-50=4:6
87g water+0.96g CL-50+300g cement
Time (min) | slump variation retention (mm) | state |
30min | 240mm | rising |
60min | 280mm | max |
120min | 280mm | max |
180min | 260mm | lost |
Introduction CL-WR-50
CL-WR-50 polycarboxylate euperplasticizer water reducing ready mix concrete admixture
Specifications:
(1) liquid 50% ( could with a solid content of 20%-55%).
(2) With a high slump retention ability, without concrete segregation, with a much smaller slump loss than that of other superplasticizers.
(3) With a good dispersion, an excellent adaptability to different cements, and good water-reducing properties. A high water-reducing ratio up to 40% could be obtained when used in high strength grade concrete.(higher than C50). With a dosage of 0.4%,water reducing rate up to 32%.
(4) Cement paste fluidity ≥250mm (with a dosage of 0.3%).
Uses and Cautions:
(1) A recommended dosage is 0.25%-0.8%. Actual dosages should be determined by mixture design test according to concrete strength grade.
(2) 0ºC-40ºC the shelf life of liquid products is 12 months.
(3) Concrete test must be carried out before utilization.
(4) This product is forbidden to be mixed with naphthalene superplasticizers.
(5) Experiment must be done when it is used together with other admixtures.
NO. | Inspection Items | Unit | Standard Value | Test Results |
1 | Appearance | / | Colorless to yellowish or brown viscous liquid | Colorless to yellowish liquid |
2 | Density | g/ml³ | 1.120-1.140 | 1.1 |
3 | Ph Value | / | 6.0-7.0 | 6.1 |
4 | Solid Content | % | 50±2.5 | 51.2 |
5 | Alkali Content( Na2O+0.658K2O) | % | ≤0.50 | 0.1 |
6 | | % | ≤0.200 | 0.002 |
7 | Sodium Sulfate Content | % | ≤0.50 | 0.25 |
8 | 1h After Fluidity of Cement Paste | mm | ≥220 | 260 |
9 | Water Reducing Rate | % | ≥25 | 32 |
10 | Atmospheric Pressure Bleeding Rate | % | ≤60 | 21 |
11 | Air Content | % | ≤6.0 | 0.42 |
12 | The Difference Between the Setting Time | min | Initial | 25 |
| | | Final | 10 |
13 | Slump Variation Retention | 60min | ≥180 | 240 |
| | 120min | ≥180 | 230 |
| | 180min | ≥170 | 180 |
14 | Ratio of Compressive Strengh | 3D | ≥170 | 190 |
| | 7D | ≥150 | 185 |
| | 28D | ≥135 | 175 |
15 | Effect on Reinforcement Corrosion | / | No Corroding | No Corroding |
16 | Ratio of Shrinkage | / | ≤110 | 101 |
Week of other agents
| |
| 1.Big slump loss 2.Hard to avoid segregation when dosage is slightly higher 3.Certain pollution to the environment as formaldehyde |
| 1.Air entraining performance is bad 2.Use cost is comparatively high 3.No highlight in its features |
Lignosulfonate water reducers | 1.Low water reduction 2.The performance is common 3.It's from 1930s, and is coming to be eliminated products. Still used today only for being eco-friendly and people's habit 4.Use cost is comparatively high |
we can make the 'hill' flow flat
Product detail show
Why chose us
Price&supply ability
Price
1.The most competitive price in the world.
2.Finish the payment in global mode or use alibaba credit insurance service.
Supply ability
1.150 containers(1*20') per month.
2.A new order can be prepared and packaged in 2 days.
Package
Main products
1.polycarboxylate superplasticizer water reducing admixture 50%(high water reducing type)
2.slow release slump retention polycarboxylate superplasticizer water reducing admixture 50%(slump retention type)
3.polycarboxylate superplasticizer water reducing admixture powder 99%(high water reducing type)
4.slump retention polycarboxylate superplasticizer water reducing admixture powder 99%(slump retention type)
5.integrated polycarboxylate superplasticizer water reducing admixture powder 98%
6.aliphatic water reducing concrete admixture
7.SNF water reducing concrete admixture
8.sodium gluconate powder
9.TPEG HPEG
10.deformer
FAQ
1. Q: Are you a manufacturer or a trading company?
A: We are a manufacturer of PCE in China.
2. Q: Can you provide technical support?
A: Yes, we can provide on line technical assistance or on site technical assistance.
3. Q: How many is your production capacity?
A: We can produce final products 3000 Metric Tons per month.
4. Q: What's your MOQ?
A: 1 Metric Ton.
5. Q: Could you offer free sample?
A: Yes, we can provide sample free for your testing.
6. Q: What's your delivery time?
A: Within 7-12 days after receiving deposit.
7. Q: Could you do OEM or ODM?
A: Yes, we can. We can do solid content 50% or 60%.
8. Q: What's your export port?
A: Qingdao port or you requested.
Address:
137-7# Yongxin Rd, Bincheng District, Binzhou, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Bags, Cases & Boxes, Chemicals, Construction & Decoration, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Service, Sporting Goods & Recreation, Tools & Hardware
Company Introduction:
Binzhou Chengli Building Materials Co., Ltd is engaged in scientific research, production and sales. We are the research and development and production base specialized in admixture of north of China. We are located in the economic and technological development zone of binzhou, covering an area of 38mu, with 8, 000 square meters for actor building areas and 600 square meters for scientific research and laboratory. Our company has built a complete concrete admixture production line, chemical analysis and physical property laboratory with Shandong University, equipped with modern instruments for measuring and testing large-scale instruments and equipment. Our company has a strong research and development group consisting of professional doctors, masters of Shandong University.
Our water reducing admixtures have good dispersion, excellent adaptability to different cements, and good water -reducing properties. More importantly, our product quality is very stable and been tested with every batch.